Rotary seals are designed to seal the pressurized hydraulic fluid against the atmosphere, preventing leakage and pollution of the environment or to transfer liquids and/or gases from a stationary part into or out of rotating machinery.
c:> The profile is designed with interference on the OD which provides a good static
fit, preventing the entry of humidity and other contamination via the outside diameter.
c:> Additional dust lip for preventing the sealing lip of dirt.
c:> Tight seat in the housing and an additional retainer ring in hard plastic or Aluminium/Steel ensures that the seal is held in place.
c:> Tension spring for increasing the bonding force.
c:> Not suitable for high pressure from the trailing side.
Pumps, electric motors, swiveling cylinders, etc.
Max. pressure 0,5 bar, max. speed: PU/POM 5 m/s; NBR/POM 10m/s; FPM/PTFE 25m/s.
press-in installation; separate installation of retainer ring and elastomer part possible.