description

wiper seal with Polyamide (PA) material.

 

application

 

 

 

category of profile

machined or molded/standard/trade product.

 

single acting

 

operating parameters & material

 

the stated operation conditions represent general indications. it is recommended not to use all maximum  values simultaneously. surface speed limits apply only to the presence of adequate lubrication film.

 

surface quality

surface roughness Ra (μm)
sliding surface according to seal data
bottom of groove ≤ 2.5
groove face ≤ 4.0

 

tolerance recommendation

seal housing tolerances
D H10

 

 don’t hesitate to contact our technical department for further information or for special requirements (temperature, speed etc.), so that suitable materi- als and/or designs can be recommended.