Function
Rotary seals are designed to seal the pressurized hydraulic fluid against the
atmosphere, preventing leakage and pollution of the environment or to transfer liquids and/or gases from a stationary part into or out of rotating machinery.
Features
- Asymmetrical, double acting rotary seal for inside sealing, designed with interference of the O-Ring on the OD and no interference of the PTFE glide ring on the ID.
- Excellent sealing performance at low speeds with high pressure.
- Peripheral grooves that enable the build up of a lubricant reservoir.
- No tendency to “stick-slip” effect.
- Low break-away load after long standstills.
- Good gap extrusion resistance.
Application
Slow moving shafts, pivoting movements, swivel or rotary joints. Used as seal between two pressurized spaces.
Max. pressure 350 bar, max. speed 0.4 m/s.
Installation
Snap-in installation.
Attention: PTFE glide rings need calibration after installation!
surface quality
surface roughness |
Rtmax (μm) |
Ra (μm) |
bottom of groove | 6.3 | 1.6 |
groove face | 15 | 3 |
tolerance recommendation
seal housing | tolerances |
L | + 0.2 |
ø NA | H8 |
ø NI | f8 |