description
elastic, excellent wear resistant V-Ring with interference fit on the shaft, rotates with the shaft, sealing axially against shaft collars, thrust blocks or the outer race of roller bearings, protecting the bearing against dust, dirt, oilsplash, watersplash and similar media. acting as a seal and slingerring.
application
category of profile
machined only.
axially acting rotary shaft seal
the stated operation conditions represent general indications. it is recommended not to use all maximum values simultaneously. surface speed limits apply only to the presence of adequate lubrication film.
1 pressure ratings are dependent on the size of the extrusion gap.
surface quality
surface roughness |
Rtmax (μm) |
Ra (μm) |
surface roughness | ≤12 | ≤2,5 |
tolerance recommendation
seal housing | tolerances |
Ød | h11 |
seal & housing recommendations
please note that we are able to produce those profiles to your specific need or any non standard housing. for detail measurements, please see Jet seal pars catalog…
don’t hesitate to contact our technical department for further information or for special requirements (temperature, speed etc.), so that suitable materi- als and/or designs can be recommended.